View Full Version : Rocket rack, how I do it.
Mississippipyro
06-02-2020, 11:50 AM
This is how I?ve decided to do my rocket racks. All my setup will be in plywood covered pallets (this includes racks), I have perfect fuse running to homemade sticky match with an igniter installed.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4977&stc=1http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4978&stc=1
Pgdark19
06-03-2020, 04:29 PM
thanks for the idea. I like how you plan to just attach it to the end of a cake board. a little modification and I can get a fan effect with the rockets. you've got my wheels turnin' now...hmm...
minute_man777
06-03-2020, 05:10 PM
Really digging the fusing in this one, haven't seen many people fusing rockets like this, nice job.
pyroboom
06-04-2020, 12:26 AM
Here's a rack I made a few weeks ago
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4987&stc=1
Mattp
06-04-2020, 12:44 AM
Pyroboom definitely makes it easier for ya!!!! One question on the rack.. is that duct tape helping to support the middle?? If so.. may want to run a piece on the backside so the rocket sticks don’t stick to it
jamisonlm3
06-04-2020, 03:54 AM
Just noticed the duct tape too. I'm guessing it was used to hold the supports together to making running the screws in esier.
Icooclast
06-04-2020, 05:30 AM
Here's a rack I made a few weeks ago
4987
leave it to pyroboom to find us a way to say "nice rack" and not it be sexist. lol - seriously that looks cool: are you going to sell it on the site with the rest of the racks?
pyroboom
06-05-2020, 04:43 AM
There is no duct tape on the rack. If you are seeing duct tape somewhere then it's for the camera shoot only. I don't see it myself and I took the picture, but it's 4:40am, so I'm a bit tired.
Also, these were for sale, but I had to pull some things off the shelf because we are too busy filling tube orders. I'll have the "ARC" rack up for sale again after 7/4.
Mississippipyro
06-05-2020, 08:54 AM
Pyroboom definitely makes it easier for ya!!!! One question on the rack.. is that duct tape helping to support the middle?? If so.. may want to run a piece on the backside so the rocket sticks don?t stick to it
The duct tape just keeps all the rockets pointed up And should help prevent them from going every direction lol
Mississippipyro
06-05-2020, 08:59 AM
Here's a rack I made a few weeks ago
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4987&stc=1
Very nice, it’s going on my, ever growing pyro equipment need list for next year, I need 9 of them :-)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.