PDA

View Full Version : A couple questions regarding script uploading and firing multiple cues



Buzz
06-30-2019, 08:09 PM
I am using firmware 5.0.2. When I have the R2 already turned on and then put the thumb drive into the port, is the screen supposed to display anything to indicate the script has uploaded? Mine doesn't seem to upload unless I turn the R2 on with thumb drive in the usb port.

The" Creating and Uploading Automated Scripts" manual says this:

"Only if you are running version 2.1.0 or 2.1.1 on your 18R2, there is a limit to fire up to 2 channels at
the same time within a 0.4s time period. In our 3.0+ firmware versions, you can fire unlimited
channels and cues at the same time. All other subsequent scripts abide by the 2 channel
restriction. You can learn more about firmware upgrades on our website."

I have 4 channels firing at the same time and I do not see any errors codes. Since 5.0.2 is subsequent to version 3.0+, I would guess it should throw an error code.

esgrillo
07-01-2019, 12:49 AM
A script will only load when you have the USB inserted and then turn on the unit. You can fire as many channels as you want at the same time with 5.0.2

Buzz
07-01-2019, 09:12 AM
Thanks Ed!