PDA

View Full Version : single shot tubes



btyree
03-20-2013, 02:05 PM
Ok so I’m going to have 192 single shot tubes (4 different kinds) to incorporate into my show this year along with 65 cakes. The finale already has 12 cakes in it. Any ideas on how to add them into the show, I have a couple ideas but would like to hear from others

PyroManiacs
03-20-2013, 05:42 PM
pin-board firing system! :)

or

fast fuse

westcoastpyro
03-20-2013, 07:37 PM
Build huge cakes, I love doing that.

superfly
03-20-2013, 09:46 PM
if they are worthy you could showcase some of them during show

btyree
03-21-2013, 09:35 AM
pin-board firing system! :)

or

fast fuse

Can u explain pin board firing system?

btyree
03-21-2013, 09:36 AM
Build huge cakes, I love doing that.

I like that idea, I could liquid nail them in a box then fuse them together with different timed fuse.

btyree
03-21-2013, 09:38 AM
if they are worthy you could showcase some of them during show

They’re pretty good tubes. I thought of fusing some together along side with the cakes.

PyroManiacs
03-21-2013, 11:44 AM
Heres the technique...


http://www.youtube.com/watch?v=x7IoCSf2pmU

rcerone1979
03-21-2013, 12:50 PM
Also if you look at the vidoes "back yard fireworks" section, the name of the video is extreme backyard fireworks at 31:09 of the video Dave took a video of my home made firing board which is along the same line as a pin board firing syatem.
<iframe width="640" height="360" src="http://www.youtube.com/embed/U_ld4QCUWPI?feature=player_embedded" frameborder="0" allowfullscreen></iframe>

Skip to the 31:09 mark or just enjoy the whole video.

rcerone1979
03-21-2013, 12:51 PM
http://www.youtube.com/watch?feature=player_embedded&v=U_ld4QCUWPI

btyree
03-21-2013, 01:26 PM
That thing is pretty awesome man. Unfortunately I don’t have a type 54, so no e-match for me.

PyroManiacs
03-21-2013, 02:36 PM
There are also consumer grade igniters:

http://www.talonigniters.com/

westcoastpyro
03-21-2013, 06:58 PM
I like that idea, I could liquid nail them in a box then fuse them together with different timed fuse.

I'm adding this to my show this year :-)

fogle22
03-23-2013, 12:48 AM
That's a lot of single shot tubes. I would hesitate to put more than a few in your finale, especially if you intend to have a sky puke finale, they will get lost in the chaos. A few breaking over your cakes will add another level.

Take three of them and liquid nail one to a board. Then take the other two and put the edge over the base of the first tube secured to the board on each side. Fuse them together with whatever timed fuse you desire....fast fuse will send them up almost together.

smilli
03-23-2013, 11:48 AM
Are u going to make a movie:)?