Nice work!!!
Type: Posts; User: rfgonzo
Nice work!!!
I enjoyed it! For your first show you did great. You can tell you put some thought into it.
Not this year, I'm out. I've had my pyromusical script done since January but unfortunately couldn't get all the product I needed, so back in March I decided to hold off till next year. Mabey I'll...
I was impressed by the lack of stupidity! Stupid should hurt.....
Dave, Thanks for the kind words! I knew you would like the Dave's magic tape. I started using Cobra systems 3 years ago and I'm up to sixteen 18M's one 72M, 18R2 and a audio box all thanks to you and...
100 in 10 to 12 seconds I would say the white quick fuse. It has a burn rate of .04 seconds per foot. You would slow it down quite a bit 10 seconds a foot with pink perfect fuse.
I like to make 1.4G racks in 10 shots also.http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=5646&stc=1
You most certainly can test with slats but if I remember correctly you need to flip the LED bulbs polarity in a slat. It's the opposite on a slat from a 18M. So if the short lead on your LED goes in...
One of my Neighbors sons took it upon himself to turn the volume down because his grandfather was complaining the music was to loud in his hearing aids.
tonyr, I purchased the 1204 and 4 215D's this past summer for my 4th of July show. I was very happy with my setup! My show is on the smaller side we normally have 300 to 400 people at our block...
I'm not going to rate them as most have given you good feed back already. I would like to say good job in thinking about safety first and asking people's opinions. Your on the right track!
I clean after every shoot with a rag and water. Then blow it out with air compressor. However I only have 1 big show a year.
Great job!!!
Congrats and welcome!
First off congrats on the cobra. Your going to love it! When scripting you will just script your cue's on your 18M 1-18 you don't need to call out slats. It doesn't matter if you run 1 or more slats.
Yep! the price of wood is through the roof. No pun intended. 2x4x8's by me used to run about $1.85 now over $5.00.
I made 5 last year. They are fantastic and i'll be making more this year. I'm guessing his price went up due to cost of material.
Liquid Nail is what I use and never had a cake break loose. You can also kick the used cakes off then scrape the wood clean however it takes some elbow grease. I just pitch the wood and buy new year...
Welcome from Sterling Heights MI, Lots of good info here.
I used a gopro hero 7 black last year for the first time and was happy with the camera. You can see the footage in my signature below.
I would have to agree with willows and horsetails.....
I was just watching the RNC and at the end during the fireworks they spelled out with single shot fireworks TRUMP, 2020 and USA. How is this achieved to wright letters or words in the sky?
When I get some time i'll make a video to show how it fits. Again just like jamisonlm3 said it's a tad large than 1.91. But when you hammer it in with 1 quick hit it will fit tightly in place. I use...
Just be careful. I have a buddy that caught his property on fire and ended up burning 8 acres of his land. Your grass is much greener then his was but still could do some damage. Not to mention the...
I have been making them for DR11 tubes. Like jamisonlm3 said all you need is a 2-1/8 hole saw and drill press....
- |