PDA

View Full Version : plugs for tubes



crackerbomb
01-06-2012, 09:58 PM
I was wanting to know what the O.D. of the plugs that will go into the DR11 2" HDPE tube. The I.D. of the tube is 1.91". I took a 2" wholesaw bit and drilled through a 2 x 4. The O.D. of the drilled out plug was 1.81". Would this be to sloppy inside the tube?

indianahx
01-06-2012, 10:29 PM
Short answer, yes. You really need to be able to force that plug in nice and snug.

shellshocker
01-08-2012, 09:30 AM
Yes it is. 2 1/4 is what you want. You should have to beat you plugs in.

crackerbomb
01-08-2012, 08:05 PM
After cutting a couple of test plugs, I got it figured out. I can't complain I am getting the dr11 for $.90 a foot. I just need to cut it and plug it.