Activity Stream

Thanks, I have put together a list and will let you know when someone reaches out to me. I appreciate the help

There's a video out there on youtube or possibly linked elsewhere here at forum. Let me take a look and try to find it. Found it while I can...

Additional layer of safety but makes cleaning or repair a bit more difficult. I've read where some people do add "liquid nails" to plugs of guns or...

Thanks for the input! Would it be overkill to put a "S" of wood glue between the wood and tubes?

I realized I have a video from 2016 talking about a fake repo. Start at 2:58 in this video. . .Here is the Ebay one.

Hold onto them for now. There are some ATF license holders in that Houston Texas area on the forums. I am going to see if we can find one of them to...

Got the concept! Thank you. I had been lining up the leader fuse from the shells parallel and then taping them with the fuse burning towards the...

I have used the "s" pattern of fusing but have come to like fusing EACH row with its own 30 second foot fuse with an inch or so over hang on one end...

I also use milk crates with success, but yes as jowad said, I use a piece of 3/4 ply on the bottom for stability. I have 5 crates loaded and have had...

3 inch racks are definately easier to build with 3 inch HDPE guns, no ripping required. Some people use spacers in 3s and some do not. I didn't...

Great to hear. Congrats. We have a LO of pyros in PA!!!!!

Sounds like you are on the right track. I hope it all works out for you. Good idea starting the process now when the ATF isn't as busy.

Contingency.. kinda having a little trouble getting a plan, so I'm stuck right now. Contacted 1 location Dave suggested, but haven't recieved a reply...

My 3"s are 18 inches with a 1.5 inch wood plug. Most 4's I've seen are 24" with a 3" plug. Hopefully that helps you get started, and good luck on...

Thanks, I will have to check into that. What is the length of the tube? I will be getting pipe on 100' length and cutting my own. Way cheaper for me!

Here is a link that I use that has a chart of all of the HDPE pipe demensions on it http://www.fabcoplastics.com/media/uploads/documents/HDPE.pdf ...

Thanks 357pyro, Appreciate the input. With all the research I could only find that the lower the "DR" number, the thicker the sidewall is and higher...

Thanks 357pyro, Appreciate the input. With all the research I could only find that the lower the "DR" number, the thicker the sidewall is and higher...

Hi Tgwinn. I don't really have much input on your first question concerning the milk crate racks as i've never used them. On your second question,...

Here is the manual for the State of Pennsylvania. . https://www.dot.state.pa.us/Public/DVSPubsForms/BDL/BDL%20Manuals/Manuals/Hazmat/Pub%20288.pdf

Dave, is your AP cert course good enough to get me some M-25's? I Don't see tanneriteexplosives.com listed as one of the distributors of AP's that...

This reminds me of when I was a kid and the circus came to town. A bunch of us kids went to watch them set up the tents. At one point a circus worker...

With the exception of full time pyro employees, there is group of part time pyro's that only do a few displays a year. They maintain the CDL with...

Question: Do folks primarily get their CDL with HAZMAT for working commercial shows run by a company? Or does anyone actually carry their own...

I am with you there

. .

Would love to see a demo or in person